Ga door naar hoofdinhoud

Wat je nodig hebt

  1. BLU Studio 7.0 II Battery Connection, Battery Connection: stap 1, afbeelding 1 van 2 BLU Studio 7.0 II Battery Connection, Battery Connection: stap 1, afbeelding 2 van 2
    • Using the PH00 screw driver, remove the two 3mm screws.

    • These screws may be covered by small, round black stickers. Remove the stickers to continue.

    • Remove the metal clip that connects the battery ribbon to the motherboard by lifting up. Precision tweezers work best for this part.

    • Be sure to only grab the metal clip with the tweezers, not the connector underneath.

  2. BLU Studio 7.0 II Battery Connection: stap 2, afbeelding 1 van 1
    • Disconnect the battery connector using a plastic opening tool or the flat end of a spudger.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Abby

Lid sinds: 14-05-16

852 Reputatie

5 handleidingen geschreven

Team

Metro State, Team 1-2, Carpenter SU 2016 Lid van Metro State, Team 1-2, Carpenter SU 2016

MSU-CARPENTER-SU16S1G2

4 Leden

6 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 16