Ga door naar hoofdinhoud

Inleiding

This guide will show you a step by step guide on how to replace a camera on the BLU Studio 5.0 S II.

  1. Remove the back cover of phone with the plastic opening tool.
    • Remove the back cover of phone with the plastic opening tool.

  2. Remove the battery with the plastic opening tool.
    • Remove the battery with the plastic opening tool.

  3. Use the Philips #00 screwdriver to remove the nine screws that the top back part of the phone has.
    • Use the Philips #00 screwdriver to remove the nine screws that the top back part of the phone has.

  4. Once you take off the screws off the phone remove the plastic backing .
    • Once you take off the screws off the phone remove the plastic backing .

  5. Remove the ribbon cable carefully on all four sides of the motherboard of the phone. Remove the ribbon cable carefully on all four sides of the motherboard of the phone.
    • Remove the ribbon cable carefully on all four sides of the motherboard of the phone.

  6. Take off the four interior screws that are on the motherboard of the phone.
    • Take off the four interior screws that are on the motherboard of the phone.

  7. Remove the ribbon cable next to the camera carefully.
    • Remove the ribbon cable next to the camera carefully.

  8. Remove the motherboard of the phone and replace camera.
    • Remove the motherboard of the phone and replace camera.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Maria Juzaino

Lid sinds: 25-10-14

499 Reputatie

3 handleidingen geschreven

Team

Gateway, Team 1-3, Johnson Fall 2014 Lid van Gateway, Team 1-3, Johnson Fall 2014

GCC-JOHNSON-F14S1G3

3 Leden

5 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 1,931