Ga door naar hoofdinhoud

BEM Mojo 2 Charging Base Battery Replacement

Wat je nodig hebt

  1. BEM Mojo 2 Charging Base Battery Replacement, Charging Base Battery: stap 1, afbeelding 1 van 1
    • Use the metal spudger to peel back the rubber from the bottom of the auxiliary charging base to reveal the screw.

  2. BEM Mojo 2 Charging Base Battery Replacement: stap 2, afbeelding 1 van 1
    • Use the screwdriver with the J0 bit attatched to detach all four 10 mm screws from the charging base.

  3. BEM Mojo 2 Charging Base Battery Replacement: stap 3, afbeelding 1 van 2 BEM Mojo 2 Charging Base Battery Replacement: stap 3, afbeelding 2 van 2
    • Pull the top cover off of the charging base to reveal the internal chip.

    • Use the plastic opening tool to pry the battery from the top cover.

    • Caution: Be careful when detaching battery from top cover as to not damage any of the wires attached to it.

  4. BEM Mojo 2 Charging Base Battery Replacement: stap 4, afbeelding 1 van 1
    • Use the tweezers to carefully detach the wires from the internal chip.

    • Caution: Be careful to not damage the internal chip when removing the wires.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Rachel Iacoboni

Lid sinds: 01/30/18

618 Reputatie

5 handleidingen geschreven

Team

Baylor, Team S1-G1, Johnson Spring 2018 Lid van Baylor, Team S1-G1, Johnson Spring 2018

BU-JOHNSON-S18S1G1

3 Leden

5 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 3

Altijd: 389