Repareer je spullen Gemeenschap Winkel

Audiovox CR8030iE5 Top-Casing Replacement

Inleiding

The purpose of this guide is to show you how to open up your Audiovox. Once inside, you will be able to check out all of the different internal components, and begin repair if necessary!

Wat je nodig hebt

  1. Audiovox CR8030iE5 Top-Casing Replacement, Top-Casing: stap 1, afbeelding 1 van 1

    • Turn the device upside down.

    • Apply constant pressure to the base of your Audiovox, while holding the plastic casing until the casing is completely removed.

    Bewerken

  2. Audiovox CR8030iE5 Top-Casing Replacement: stap 2, afbeelding 1 van 1

    • Remove the four screws from the base using a Phillips #1 screwdriver.

    Bewerken

  3. Audiovox CR8030iE5 Top-Casing Replacement: stap 3, afbeelding 1 van 1

    • Turn the device right-side up.

    • Gently pull the top panel off of the device.

    Bewerken

  4. Audiovox CR8030iE5 Top-Casing Replacement: stap 4, afbeelding 1 van 1

    • Using a Phillips #1 screwdriver, remove the screw found in the middle of the board.

    Bewerken

  5. Audiovox CR8030iE5 Top-Casing Replacement: stap 5, afbeelding 1 van 1

    • Pull back the board gently to avoid disconnecting the attached wires.

    • This allows you to view the soldered connections on the other side, and the internal components.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 8 andere bijdragers

Savannah Smith

Lid sinds: 04/18/13

51 Reputatie

2 handleidingen geschreven

Medailles: 7

+4 andere badges

Team

Cal Poly, Team 10-39, Amido Spring 2013 Lid van Cal Poly, Team 10-39, Amido Spring 2013

CPSU-AMIDO-S13S10G39

4 Leden

6 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 1

Altijd: 321