Inleiding

This repair guide will help you with the following:

  • install the right headphone cable
  • fix sound in right ear
  1. Remove the ear pads by peeling them away from the grill.
    • Remove the ear pads by peeling them away from the grill.

  2. Remove all four 1cm screws on the inside of the headphone using a #1 Phillips head.
    • Remove all four 1cm screws on the inside of the headphone using a #1 Phillips head.

    • Remove the speaker from the grill by pulling it out.

    • Remove the speaker carefully so you do not rip the wires out.

    • Remove the wires by de-soldering both the red and yellow wires using the soldering iron and desoldering wick. If you need assistance, reference How To Solder and Desolder Connections.

    • The areas where you soldered will be hot so let the soldered joints cool for before handling again.

    • Connect the the new red and yellow wires by re-soldering the wires using the soldering iron. If you need assistance, reference How To Solder and Desolder Connections.

    • The areas where you soldered will be hot so let the soldered joints cool for before handling again.

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Melanie Reis

Lid sinds: 11-01-13

121 Reputatie

5 handleidingen geschreven

Team

Cal Poly, Team 17-19, Forte Winter 2013 Lid van Cal Poly, Team 17-19, Forte Winter 2013

CPSU-FORTE-W13S17G19

6 Leden

6 handleidingen geschreven

Één commentaar

Where can i buy a replacement cable? Cant seem to find it anywhere.

Stefan Rasmussen - Antwoord

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 8

Afgelopen 30 Dagen: 36

Altijd: 2,615