Wat je nodig hebt
-
-
Using a T4 Torx screwdriver, remove the ten screws at the marked locations.
-
-
-
-
Disconnect the battery from the motherboard by gently pulling up and down on the connector.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annuleren: ik heb deze handleiding niet afgemaakt.
5 andere personen hebben deze handleiding voltooid.
2 opmerkingen
Thanks for the easy to understand guide. Cheers!
Thanks for the guideline it easy to understand and easy to follow. Thanks again!