Ga door naar hoofdinhoud

Inleiding

This guide will show you how to replace a dented or damaged bottom panel on an Asus ZenBook UX303U laptop.

Onderdelen

Geen onderdelen opgegeven.

  1. Remove the two round rubber feet at the hinge-edge of the laptop.
    • Remove the two round rubber feet at the hinge-edge of the laptop.

  2. Remove the eleven 4 mm Phillips #00 screws from the back panel.
    • Remove the eleven 4 mm Phillips #00 screws from the back panel.

  3. Using a plastic opening tool pry the back panel off of the laptop. Using a plastic opening tool pry the back panel off of the laptop.
    • Using a plastic opening tool pry the back panel off of the laptop.

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Luis Perez

Lid sinds: 14-02-18

508 Reputatie

2 handleidingen geschreven

Team

USF Tampa, Team S3-G5, Nance Spring 2018 Lid van USF Tampa, Team S3-G5, Nance Spring 2018

USFT-NANCE-S18S3G5

3 Leden

9 handleidingen geschreven

Één commentaar

Some models may utilize Phillips #00 screws, but mine (and many others based on what I’ve now read) utilize Torx T5 screws around the edges of the panel.

Nick Brennan - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 3

Afgelopen 7 dagen: 12

Afgelopen 30 dagen: 53

Altijd: 4,124