Remove the battery, then unscrew the 7 3 mm Phillips screws behind the battery. Make sure they go in separate, organized piles. Unscrew the 2 4 mm Phillips head screws by the battery. Unscrew the 2 4 mm Phillips head screws by the battery.
  • Remove the battery, then unscrew the 7 3 mm Phillips screws behind the battery. Make sure they go in separate, organized piles.

  • Unscrew the 2 4 mm Phillips head screws by the battery.

Voeg opmerking toe

Remove the panel above the keyboard with a plastic spudger.
  • Remove the panel above the keyboard with a plastic spudger.

Voeg opmerking toe

Once the panel is removed, use the spudger to pry out the keyboard.
  • Once the panel is removed, use the spudger to pry out the keyboard.

  • Do not fully remove, for the keyboard is still attached to the ribbon cable.

Voeg opmerking toe

Detach the ribbon cable from the keyboard by pulling the end of the ribbon cable that is attached inside of the laptop. Be sure to detach from the root rather than from near the middle. It should slide out with ease.
  • Detach the ribbon cable from the keyboard by pulling the end of the ribbon cable that is attached inside of the laptop.

  • Be sure to detach from the root rather than from near the middle. It should slide out with ease.

  • Now you can fully remove the keyboard from the laptop.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Joe Redfearn

Lid sinds: 14-04-14

101 Reputatie

1 Handleiding geschreven

Team

Cal Poly, Team 13-29, Maness Spring 2014 Lid van Cal Poly, Team 13-29, Maness Spring 2014

CPSU-MANESS-S14S13G29

4 Leden

8 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 181