Skip to main content

Inleiding

Replace a broken hard drive or upgrade your hard drive to increase your storage space.

Onderdelen

Geen onderdelen opgegeven.

  1. Before disassembly, make sure the laptop is powered off and the battery is disconnected.
    • Before disassembly, make sure the laptop is powered off and the battery is disconnected.

    • Remove the two screws (size?) on the lower panel at the bottom of the laptop (identify tool to use).

  2. Grab the panel and lift upwards while pulling towards yourself.
    • Grab the panel and lift upwards while pulling towards yourself.

  3. MacBook-reparatiesets voor batterijen

    Vanaf $69.99

    Buy Now

    MacBook-reparatiesets voor batterijen

    Vanaf $69.99

    Buy Now
  4. Remove the 3 4 mm Phillips upper screws holding the hard drive down.
    • Remove the 3 4 mm Phillips upper screws holding the hard drive down.

  5. Pull the hard drive towards yourself to disconnect it from the laptop.
    • Pull the hard drive towards yourself to disconnect it from the laptop.

  6. Lift the hard drive upwards to remove it from the laptop.
    • Lift the hard drive upwards to remove it from the laptop.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Nolan Schock

Lid sinds: 14-04-14

501 Reputatie

5 handleidingen geschreven

Team

Cal Poly, Team 13-29, Maness Spring 2014 Lid van Cal Poly, Team 13-29, Maness Spring 2014

CPSU-MANESS-S14S13G29

4 Leden

8 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 2

Altijd: 178