Onderdelen

Geen onderdelen nodig.

Flip the computer over so that it is upside down.
  • Flip the computer over so that it is upside down.

  • Slide both latches away from each other (towards the outside).

  • Push the battery out with your fingers.

  • The actual battery is not shown in the photograph.

Voeg opmerking toe

Remove the two screws on the underside of the case.
  • Remove the two screws on the underside of the case.

  • These screws should should have a keyboard "K" symbol next to them.

Voeg opmerking toe

  • Locate the little tabs above the INSERT, F10 and F1 keys, and between the F5 and F6 keys.

  • Starting with the tab above the F1 key, press the tabs inward using your fingernail or spudger. Continue this process for the rest of the tabs.

  • Once all four tabs have been released, the top half of the keyboard should be free.

Voeg opmerking toe

  • Pull the keyboard out at a 45 degree angle and place it upside down on the scroll pad.

  • Pull the wide ribbon cable laterally from its socket on the motherboard.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Steven

Lid sinds: 24-06-10

32 Reputatie

2 handleidingen geschreven

Team

Cal Poly, Team 2-9, Johann Summer 2010 Lid van Cal Poly, Team 2-9, Johann Summer 2010

CPSU-JOHANN-R10S2G9

5 Leden

11 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 1

Altijd: 4,721