Inleiding

To access your hard drive, remove the back plate as shown in these steps.

Onderdelen

Geen onderdelen nodig.

  1. With the computer upside down, lift up on the rubber cap on the back plate to access the captive Phillips #2 screw.
    • With the computer upside down, lift up on the rubber cap on the back plate to access the captive Phillips #2 screw.

  2. Gratis verzending van alle bestellingen van meer dan US$ 100 of met een Pro Tech Toolkit!

    Doorblader onze winkel
  3. Retract the Phillips #2 screw until the cover is loose.
    • Retract the Phillips #2 screw until the cover is loose.

    • The screw will not come all the way out.

  4. Pry around the edges of the plate using a plastic opening tool until the plate is removed. Pry around the edges of the plate using a plastic opening tool until the plate is removed. Pry around the edges of the plate using a plastic opening tool until the plate is removed.
    • Pry around the edges of the plate using a plastic opening tool until the plate is removed.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Tanner

Lid sinds: 21-09-18

761 Reputatie

5 handleidingen geschreven

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 5

Altijd: 65