Deze versie kan foutieve bewerkingen bevatten. Schakel over naar de recentste gecontroleerde momentopname.
Wat je nodig hebt
-
Deze stap is niet vertaald. Help het te vertalen
-
Carefully remove the back panel by using a plastic opening tool to remove the panel off the device.
-
Pull the back panel away from the device.
-
-
Deze stap is niet vertaald. Help het te vertalen
-
Unlock the ZIF connectors on the data cables.
-
Remove the cable from its slot by gently pulling downward on the tabs.
-
-
-
Deze stap is niet vertaald. Help het te vertalen
-
Locate the battery connector by following the wires that come from the top right of the battery. To disconnect the battery just lift up gently on the wires. Use a spudger or blue plastic opening tool to gently lift the wires if it is hard to get a grip.
-
-
Deze stap is niet vertaald. Help het te vertalen
-
Using a spudger carefully pry the battery up. It is glued down so slight pressure may be needed.
I don't think you need to do this step (my motherboard came out and back in just fine, I just had to keep the battery cord out of the way, which is way easier than prying the whole thing out of there).
-
Annuleren: ik heb deze handleiding niet afgemaakt.
14 andere personen hebben deze handleiding voltooid.
4 opmerkingen
How did you fix the sd card port?
where can i buy battery for asus memopad here in naga city, cam sur,philippines?
Important: Remove SD card first!
Ola Eldøy - Antwoord