Ga door naar hoofdinhoud

Asus A52F Cooling System Replacement

Wat je nodig hebt

  1. Asus A52F Cooling System Replacement, Battery: stap 1, afbeelding 1 van 2 Asus A52F Cooling System Replacement, Battery: stap 1, afbeelding 2 van 2
    • Place the laptop face down with the battery facing away from you.

    • Locate the two buttons next to the battery.

    • Slide the right slider to the unlocked (red) position.

  2. Asus A52F Cooling System Replacement: stap 2, afbeelding 1 van 2 Asus A52F Cooling System Replacement: stap 2, afbeelding 2 van 2
    • Hold the left button to the left.

    • Slide the battery with your other hand away from you and it should disconnect.

  3. Asus A52F Cooling System Replacement, Lower Case: stap 3, afbeelding 1 van 3 Asus A52F Cooling System Replacement, Lower Case: stap 3, afbeelding 2 van 3 Asus A52F Cooling System Replacement, Lower Case: stap 3, afbeelding 3 van 3
    • Remove the five Phillips # 0 screws from the back panel.

    • Using your finger or a plastic spudger start to carefully pry up the back planel.

  4. Asus A52F Cooling System Replacement: stap 4, afbeelding 1 van 2 Asus A52F Cooling System Replacement: stap 4, afbeelding 2 van 2
    • Slide the back panel away and remove the panel.

  5. Asus A52F Cooling System Replacement, Cooling System: stap 5, afbeelding 1 van 2 Asus A52F Cooling System Replacement, Cooling System: stap 5, afbeelding 2 van 2
    • Removal of cooling system will void your warranty. Proceed with caution.

  6. Asus A52F Cooling System Replacement: stap 6, afbeelding 1 van 2 Asus A52F Cooling System Replacement: stap 6, afbeelding 2 van 2
    • Using a Phillips #0 screwdriver, remove all six screws from the cooling system.

    • Unplug the fan power connector.

  7. Asus A52F Cooling System Replacement: stap 7, afbeelding 1 van 2 Asus A52F Cooling System Replacement: stap 7, afbeelding 2 van 2
    • Carefully grab the copper pipe and start to lift upward.

    • Lift to the angle shown and then start to slide it out.

  8. Asus A52F Cooling System Replacement: stap 8, afbeelding 1 van 1
    • Clean the designated area with isopropyl alcohol on a microfiber cloth

    • Replace with new thermal paste if needed

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Bradley Varnum

Lid sinds: 03/09/17

294 Reputatie

2 handleidingen geschreven

Team

UMass Dartmouth, Team S5-G1, Botvin Spring 2017 Lid van UMass Dartmouth, Team S5-G1, Botvin Spring 2017

UMASSD-BOTVIN-S17S5G1

4 Leden

7 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 9

Altijd: 830