1. Get the watch ready by placing it on its face.
    • Get the watch ready by placing it on its face.

  2. Pick a location that is by the band so that if you make any scratches they will be less obvious when you are done. Place the screwdriver between the frame and the back cover. Gently tap the back of the screwdriver with a small hammer or whatever you have around. Do not use your hand!
    • Pick a location that is by the band so that if you make any scratches they will be less obvious when you are done. Place the screwdriver between the frame and the back cover. Gently tap the back of the screwdriver with a small hammer or whatever you have around. Do not use your hand!

  3. Gratis verzending van alle bestellingen van meer dan US$ 100 of met een Pro Tech Toolkit!

    Doorblader onze winkel
  4. Remove back.
    • Remove back.

  5. While securing the inside of the watch with a finger or thumb, gently pry out the battery.
    • While securing the inside of the watch with a finger or thumb, gently pry out the battery.

  6. Insert a new battery. Line up the cover in the correct position.  Keep the notch lined up with the winding screw. Secure the back to the frame by applying equal pressure and squeezing the two parts together.
    • Insert a new battery. Line up the cover in the correct position. Keep the notch lined up with the winding screw. Secure the back to the frame by applying equal pressure and squeezing the two parts together.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Matthew Radice

Lid sinds: 18-01-16

122 Reputatie

1 Handleiding geschreven

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 30