Repareer je spullen Join de gemeenschap Winkel

Apple Wireless Keyboard Logic Board Replacement

Inleiding

You need a Metal spudger and a screwdriver

Wat je nodig hebt

  1. Apple Wireless Keyboard Logic Board Replacement, Logic Board: stap 1, afbeelding 1 van 2 Apple Wireless Keyboard Logic Board Replacement, Logic Board: stap 1, afbeelding 2 van 2

    • Insert a metal spudger to open the plastic part under the Keyboard

    Bewerken

  2. Apple Wireless Keyboard Logic Board Replacement: stap 2, afbeelding 1 van 1

    • Remove the screw

    Bewerken

  4. Apple Wireless Keyboard Logic Board Replacement: stap 3, afbeelding 1 van 3 Apple Wireless Keyboard Logic Board Replacement: stap 3, afbeelding 2 van 3 Apple Wireless Keyboard Logic Board Replacement: stap 3, afbeelding 3 van 3

    • Pull the lock up and disconnect the connection cable

    Bewerken

  5. Apple Wireless Keyboard Logic Board Replacement: stap 4, afbeelding 1 van 1

    • Keeping the connection cable, push out the logic board's placement

    Bewerken

  6. Apple Wireless Keyboard Logic Board Replacement: stap 5, afbeelding 1 van 1

    • Unlock the latch of the logic board

    Bewerken

  7. Apple Wireless Keyboard Logic Board Replacement: stap 6, afbeelding 1 van 1

    • Remove the logic board from the placement

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

19 andere personen hebben deze handleiding voltooid.

Auteur

met 3 andere bijdragers

Nicola

Lid sinds: 11/14/13

614 Reputatie

1 Handleiding geschreven

Medailles: 7

+4 andere badges

9 opmerkingen

Hi, anyone know where its possible to buy this logic board? My bluetooth chip is apparently broken

steve - Antwoord

Which model of keyboard is this, because my A1255 doesn't disassemble like this - the battery terminal is solidly restrained inside the tube by means of a metal expansion ring. Doesn't seem user repairable :(

gordon jackson - Antwoord

My power button was stuck. The shell was dented. This was an easier way to access and remove the button so I was able to file the inside of the tube smooth so the button would move freely.

Tony - Antwoord

I have disassembled my keyboard as shown above, but now I need a replacement Wireless Keyboard Logic Board. I have not been able to find one. Any suggestions?

Martin Rubio - Antwoord

Very nice! in my case the flat cable was not properly connecting. I only found out when i opened the cap to the logic board and saw the cable sitting slanted in its connector. Put it back straight and now it works again. Cheers!!

mollymol - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 27

Afgelopen 30 dagen: 150

Altijd: 46,559