Inleiding

This guide will show you how to install a Powerbook 5300 battery.

Position the Powerbook towards you with the monitor closed.
  • Position the Powerbook towards you with the monitor closed.

  • Press the battery removal latch located on the right side of the front panel.

  • Gently slide the battery out.

  • The keyboard, front pane, and hard drive are connected to the laptop's logic board via a ribbon cable. Lift up slowly on each component with one hand and disconnect the ribbons from their ports on the logic board.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Alex Wineteer

Lid sinds: 13-04-11

136 Reputatie

1 Handleiding geschreven

Team

Cal Poly, Team 25-30, Garner Spring 2011 Lid van Cal Poly, Team 25-30, Garner Spring 2011

CPSU-GARNER-S11S25G30

4 Leden

6 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 4

Afgelopen 30 Dagen: 12

Altijd: 2,222