Ga door naar hoofdinhoud

Inleiding

In order to obtain access to the internal components you must first follow this step by step general disassembly guide. This will be a first stop in installing a new component that is enclosed by the outer shell.

Onderdelen

Geen onderdelen opgegeven.

  1. Turn computer over. Remove battery expansion cover and battery.
    • Turn computer over.

    • Remove battery expansion cover and battery.

  2. With monitor hinge at the bottom, remove the two top center screws.
    • With monitor hinge at the bottom, remove the two top center screws.

    Not necessary for RAM, hard drive, or CPU replacement.

    Miles Raymond - Antwoord

    The Screws are T8!

    Willy Kaiser - Antwoord

  3. Remove top left and top right screws.
    • Remove top left and top right screws.

    Also not necessary for RAM, hard drive, or CPU replacement.

    Miles Raymond - Antwoord

  4. PC Laptop batterijen

    Een snelle fix voor een grote boost.

    Nu winkelen

    PC Laptop batterijen

    Een snelle fix voor een grote boost.

    Nu winkelen
  5. Remove middle left and middle right screws.
    • Remove middle left and middle right screws.

  6. Open computer kickstands.
    • Open computer kickstands.

    • Remove screws underneath each kickstand.

    Again not necessary for RAM, hard drive, or CPU replacement.

    Miles Raymond - Antwoord

  7. Lift keyboard from bottom and take out of shell.
    • Lift keyboard from bottom and take out of shell.

  8. Lift the white ribbon clamps securing the keyboard ribbon cables to the motherboard. You can do this using a plastic opening tool. Removing both ribbon cables from the motherboard will leave the clamps like so. From here you can access the logic board, hard drive, and floppy drive.
    • Lift the white ribbon clamps securing the keyboard ribbon cables to the motherboard. You can do this using a plastic opening tool.

    • Removing both ribbon cables from the motherboard will leave the clamps like so.

    • From here you can access the logic board, hard drive, and floppy drive.

Conclusie

To reassemble your device, follow these instructions in reverse order.

7 andere personen hebben deze handleiding voltooid.

Mark McNeff

Lid sinds: 20-04-11

469 Reputatie

2 handleidingen geschreven

http://tim.id.au/laptops/apple/powerbook... (PDF)

Apple Service Source: PowerBook 500 Series

Guides for everything.

tas - Antwoord

Thanks been trying to fix this for a long time

Luke - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 2

Afgelopen 30 Dagen: 12

Altijd: 4,515