American Sanders EZSand Orbital Sander 07163A 2017 Sandpaper Disc Replacement

Inleiding

Use this guide to replace the hook-and-loop sandpaper disc on a Clarke Floor Sander 07163A 2017.

This guide shows the removal of just one disc, but the procedure for the other two discs is identical.

Before you begin, be sure that the sander is unplugged and powered off.
Carefully tilt the sander back and lay it down on its side, exposing the three sanding pads on the bottom.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Lid sinds: 04/11/15

196.170 Reputatie

416 handleidingen geschreven