Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Inleiding

Use this guide to remove and replace the speaker in the Amazon Echo Dot 2nd Generation.

Onderdelen

Geen onderdelen opgegeven.

  1. Power off and unplug the echo Using the plastic opening tool, peel off the rubber layer on the bottom of the echo Using the plastic opening tool, peel off the rubber layer on the bottom of the echo
    • Power off and unplug the echo

    • Using the plastic opening tool, peel off the rubber layer on the bottom of the echo

  2. Use the T8 screwdriver bit to unscrew the four 1.6mm torx screws Remove the black, cylindrical base Remove the black, cylindrical base
    • Use the T8 screwdriver bit to unscrew the four 1.6mm torx screws

    • Remove the black, cylindrical base

  3. Tap the base against the palm of your hand so that the black speaker component comes out
    • Tap the base against the palm of your hand so that the black speaker component comes out

Conclusie

To reassemble your device, follow these instructions in reverse order.

9 andere personen hebben deze handleiding voltooid.

Alexis White

Lid sinds: 09-10-17

396 Reputatie

2 handleidingen geschreven

Team

USF Tampa, Team S1-G3, Leahy Fall 2017 Lid van USF Tampa, Team S1-G3, Leahy Fall 2017

USFT-LEAHY-F17S1G3

3 Leden

10 handleidingen geschreven

Where can one purchase the replacement speaker component?

ananomaus - Antwoord

Can you inform us were to get replacement speaker please.

John Stead - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 10

Afgelopen 7 dagen: 35

Afgelopen 30 dagen: 186

Altijd: 8,006