Inleiding

If you are having various issues with your device, this guide will show you how to remove and replace the motherboard.

  1. Remove external rubber cover.
    • Remove external rubber cover.

  2. Use blue plastic opening tool to remove the external speaker face by placing it in the slight opening at the bottom. Use a lever motion, push the tool down, lifting the speaker face.
    • Use blue plastic opening tool to remove the external speaker face by placing it in the slight opening at the bottom.

    • Use a lever motion, push the tool down, lifting the speaker face.

    • Use fingers to grip and remove speaker face.

    • Repeat on reverse side to remove the second speaker face.

  3. Orient speaker so volume buttons are facing away from you, and Bluetooth and power buttons are on the left-hand side. Remove the seven 14mm screws using the Phillips #1 screwdriver.
    • Orient speaker so volume buttons are facing away from you, and Bluetooth and power buttons are on the left-hand side.

    • Remove the seven 14mm screws using the Phillips #1 screwdriver.

  4. Gratis verzending van alle bestellingen van meer dan US$ 100 of met een Pro Tech Toolkit!

    Doorblader onze winkel
  5. Reorient speaker so Bluetooth and power buttons are now on the right-hand side.
    • Reorient speaker so Bluetooth and power buttons are now on the right-hand side.

    • Separate the two panels along the crease.

    • Blue plastic opening tool may be needed to separate panels.

    • Remove the panel with no buttons to expose internal area of the device.

    • Motherboard and all internal components are under this panel.

  6. Remove the five wiring attachments (for the volume board, bluetooth board, speakers, and microUSB)  from their connection to the motherboard by pulling slightly.
    • Remove the five wiring attachments (for the volume board, bluetooth board, speakers, and microUSB) from their connection to the motherboard by pulling slightly.

  7. Remove the two 9mm screws holding the motherboard in place using the Torx T5 screwdriver. Remove the two 9mm screws holding the motherboard in place using the Torx T5 screwdriver.
    • Remove the two 9mm screws holding the motherboard in place using the Torx T5 screwdriver.

  8. Remove the motherboard.
    • Remove the motherboard.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Kendra Pennington

Lid sinds: 10-09-18

97 Reputatie

1 Handleiding geschreven

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 53