Repareer je spullen Gemeenschap Winkel

Alienware m15 R6 Base Cover Replacement

Inleiding

Prerequisites 1. Follow the procedure in Before working inside your computer.

About this task The following images indicate the location of the base cover and provide a visual representation of the removal procedure.

Wat je nodig hebt

  1. Alienware m15 R6 Base Cover Replacement, Base Cover: stap 1, afbeelding 1 van 1

    • Remove the two screws (M2.5x5) that secure the base cover to the palm-rest and keyboard assembly.

    • New line. Loosen the two captive screws (M2.5x8.5+3.5) that secure the base cover to the palm-rest and keyboard assembly

    • Loosen the four captive screws (M2.5x1.7+3.3) that secure the base cover to the palm-rest and keyboard assembly.

    Bewerken

  3. Alienware m15 R6 Base Cover Replacement: stap 2, afbeelding 1 van 1

    • Using your fingertips, pry open the base cover from the middle of the front edge of base cover, and then pry the left and right sides of the base cover.

    • Lift the base cover off the palm-rest and keyboard assembly.

    Bewerken

  4. Alienware m15 R6 Base Cover Replacement: stap 3, afbeelding 1 van 1

    • Disconnect the battery cable from the system board.

    • Turn your computer over and press the power button for 20 seconds to drain the flea power

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 1 andere bijdrager

Andrzej

Lid sinds: 02/17/23

1.672 Reputatie

18 handleidingen geschreven

Medailles: 12

+9 andere badges

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 21

Altijd: 248