Ga door naar hoofdinhoud

Alienware 17 R2 Status-Light Board Replacement

Wat je nodig hebt

    • Remove the screws that secure the status-light board to the palm-rest assembly.

  1. Alienware 17 R2 Status-Light Board Replacement, Lifting the Status-Light Board: stap 3, afbeelding 1 van 1
    • Lift the status-light board off the palm-rest assembly.

  2. Alienware 17 R2 Status-Light Board Replacement, Screw Align: stap 4, afbeelding 1 van 1
    • Align the screw holes on the status-light board with the screw holes on the palm-rest assembly.

  3. Alienware 17 R2 Status-Light Board Replacement, Screw Replacement: stap 5, afbeelding 1 van 1
    • Replace the screws that secure the status-light board to the palm-rest assembly.

  4. Alienware 17 R2 Status-Light Board Replacement, Sliding the Status-Light Board: stap 6, afbeelding 1 van 1
    • Slide the status-light board cable into the connector on the status-light board and press down the latch to secure the cable.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Terrence15

Lid sinds: 12/18/17

79.031 Reputatie

441 handleidingen geschreven

Team

RampUP America, Inc. Lid van RampUP America, Inc.

Community

42 Leden

1.985 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 2

Altijd: 282