Inleiding
In order to replace the joysticks for the Afterglow Wireless PS3 Controller the back plate must be removed and the joystick boards must be unscrewed.
Wat je nodig hebt
-
-
Lay the controller face down on a flat surface and remove the seven 9mm Phillips #0 screws on the back of the controller.
-
Lift up and remove the controller back plate.
Vraag FixBot
-
-
-
Carefully remove the battery by lifting it straight up from its place.
-
-
-
-
Unscrew the four 9mm Phillips #0 screws that are attached to both joy stick control mini-motherboards. There are two screws for each mini-motherboard.
-
-
-
Jiggle both joy stick control mini-motherboards out of their holding place.
-
-
-
Firmly grip the joystick housing with your forefingers by the yellow squares.
-
Use your other hand to get a grip on the black plastic joystick and pull directly away from the housing.
-
To reassemble your device, follow these instructions in reverse order.
Annuleren: ik heb deze handleiding niet afgemaakt.
12 andere personen hebben deze handleiding voltooid.
Team
USF Tampa, Team S19-G5, Hoffman Spring 2017 Lid van USF Tampa, Team S19-G5, Hoffman Spring 2017
USFT-HOFFMAN-S17S19G5
4 Leden
20 handleidingen geschreven
