Ga door naar hoofdinhoud

Inleiding

This guide will walk you through the steps necessary to replace your screen hinge. There are multiple small screws and delicate parts, so take your time and stay organized.

  1. Open the screen.
    • Open the screen.

  2. Remove the screen portion from the keyboard.
    • Remove the screen portion from the keyboard.

  3. Turn over the keyboard and use the plastic opening tool to remove the two adhesive backed rubber pads furthest from the hinge. Turn over the keyboard and use the plastic opening tool to remove the two adhesive backed rubber pads furthest from the hinge.
    • Turn over the keyboard and use the plastic opening tool to remove the two adhesive backed rubber pads furthest from the hinge.

  4. Remove the ten total screws from the back cover with a Phillips #1 screwdriver. 8 screws 4.25mm in length with 4.00mm diameter heads. 2 screws 6.00mm in length with 4.00mm diameter heads.
    • Remove the ten total screws from the back cover with a Phillips #1 screwdriver.

    • 8 screws 4.25mm in length with 4.00mm diameter heads.

    • 2 screws 6.00mm in length with 4.00mm diameter heads.

  5. Use the plastic opening tool to separate the front and back halves of the keyboard.
    • Use the plastic opening tool to separate the front and back halves of the keyboard.

  6. Lift away the loosened back cover.
    • Lift away the loosened back cover.

  7. Use a pair of tweezers to remove the electrical connector for the hinge. Pull gently while wiggling the connector back and forth. Remove the adhesive tape holding the wire down.
    • Use a pair of tweezers to remove the electrical connector for the hinge. Pull gently while wiggling the connector back and forth.

    • Remove the adhesive tape holding the wire down.

  8. To free the hinge, remove the 4 mount screws with a Phillips #0 screwdriver. To free the hinge, remove the 4 mount screws with a Phillips #0 screwdriver.
    • To free the hinge, remove the 4 mount screws with a Phillips #0 screwdriver.

  9. Remove the disconnected hinge from the keyboard. Remove the disconnected hinge from the keyboard.
    • Remove the disconnected hinge from the keyboard.

Conclusie

To reassemble your device, follow these instructions in reverse order.

6 andere personen hebben deze handleiding voltooid.

Justin Bawinkel

Lid sinds: 01-04-19

327 Reputatie

1 Handleiding geschreven

Team

IUPUI, Team S2-G6, Harley Spring 2019 Lid van IUPUI, Team S2-G6, Harley Spring 2019

IUPUI-HARLEY-S19S2G6

4 Leden

2 handleidingen geschreven

4 Opmerkingen

Where can I buy the hinges of acer one 10 D16H1?

ladysam020889 - Antwoord

Do you know where I can find hinges of acer one s1003?

Al Monslisa - Antwoord

The hinge is so stiff it broke off the keyboard tabs. I need to loosen the hinge and replace the keyboard base, or hopefully just the positioning tabs (if they can be reglued).

PGI Cruiser - Antwoord

Tutoriel bien expliqué, merci pour tout, vous m’avez bien aidé à changer la charnière moi-même.

Francis Meylemans - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 3

Afgelopen 7 dagen: 30

Afgelopen 30 dagen: 83

Altijd: 4,391