Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Inleiding

If you have a problem with the Audio Jack Connector, in this manual we will show you how to change it.

Video overzicht

  1. Switch-off the tablet. Remove any SIM and/or Memory Card. Start opening near to the Volume Up/Down buttons. It's more well to use a plastic opening tool to avoid damaging the cover.
    • Switch-off the tablet.

    • Remove any SIM and/or Memory Card.

    • Start opening near to the Volume Up/Down buttons. It's more well to use a plastic opening tool to avoid damaging the cover.

    • When lifting the cover, be careful not to tear the Loudspeaker cable at the bottom right side.

    • Disconnect the Loudspeaker cable from the Logic board.

  2. Nintendo Switch-kits

    Een snelle oplossing die je weer mee laat doen

    Koop Switchkits

    Nintendo Switch-kits

    Een snelle oplossing die je weer mee laat doen

    Koop Switchkits
  3. Before doing anything, disconnect the battery. Before doing anything, disconnect the battery.
    • Before doing anything, disconnect the battery.

  4. Unscrew 2x Philips screws Disconnect and remove the Audio Jack Board flex cable. Remove the  board with the Audio Jack Connector.
    • Unscrew 2x Philips screws

    • Disconnect and remove the Audio Jack Board flex cable.

    • Remove the board with the Audio Jack Connector.

Conclusie

To reassemble your device, follow these instructions in reverse order.

ZFix

Lid sinds: 09-12-13

172.529 Reputatie

307 handleidingen geschreven

Team

Master Techs Lid van Master Techs

Community

294 Leden

943 handleidingen geschreven

Één commentaar

Can anyone suggest part number for whole jack board or just of jack?

Alexander Zaripov - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 515