Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Inleiding

How to disassemble the laptop and change the Cooling system.

  1. Switch-off the Laptop.
    • Switch-off the Laptop.

    • Remove the seventeen Philips #0 screws.

  2. If there is a plastic storage tray in the laptop, remove it.
    • If there is a plastic storage tray in the laptop, remove it.

  3. LCD iPhone-scherm fixkits

    De goedkope optie, ondersteund door onze levenslange garantie.

    Koop kits

    LCD iPhone-scherm fixkits

    Bespaar op reparatiekosten, niet op kwaliteit.

    Koop kits
  4. Starting from the SD Memory Card hole, start prying between the top and bottom cases. Use plastic tools to avoid damaging the cover. Remove the bottom case.
    • Starting from the SD Memory Card hole, start prying between the top and bottom cases.

    • Use plastic tools to avoid damaging the cover.

    • Remove the bottom case.

  5. Disconnect the battery immediately for a safer repair.
    • Disconnect the battery immediately for a safer repair.

    • Pull the battery connector away from the hard drive to disconnect it.

  6. Disconnect the Fan cable. Remove the three screws from the CPU cooler and one from the Fan module.
    • Disconnect the Fan cable.

    • Remove the three screws from the CPU cooler and one from the Fan module.

    • When you change the Cooling system, you must clean the processor from old thermal compound and put new.

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

ZFix

Lid sinds: 09-12-13

169.646 Reputatie

306 handleidingen geschreven

Team

Master Techs Lid van Master Techs

Community

293 Leden

841 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 8

Altijd: 1,946