Inleiding

USB is essential on modern laptops. Use this guide to fix your broken ports.

  1. Locate and remove the two 5.3 mm Phillips #1 screws holding the back panel in place.
    • Locate and remove the two 5.3 mm Phillips #1 screws holding the back panel in place.

    Voeg opmerking toe

  2. Use a spudger to pry the panel up from the laptop case and remove it.
    • Use a spudger to pry the panel up from the laptop case and remove it.

    • The laptop should now be open with the RAM and wifi chip now accessible.

    Voeg opmerking toe

    • Locate the wifi chip.

    Voeg opmerking toe

    • Remove the 5 mm Phillips #1 screw holding the wifi chip in place.

    • Carefully remove the wifi chip.

    Voeg opmerking toe

    • Remove the 8, 9 mm Phillips #1 screws holding the panel in place.

    Voeg opmerking toe

    • Flip the computer over, and with a spudger, remove the black panel directly below the keyboard.

    • Remove the panel and flip it up onto the keyboard

    Voeg opmerking toe

    • With the panel removed, locate the USB port ribbon cable connecting to the motherboard.

    • Carefully disconnect the ribbon cable.

    Voeg opmerking toe

    • Unscrew the 5 mm Phillips #1 screw holding the USB ports in place.

    Voeg opmerking toe

    • The USB ports can now be removed from the laptop.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

6 andere personen hebben deze handleiding voltooid.

Ryan Holland

Lid sinds: 15-04-14

383 Reputatie

2 handleidingen geschreven

Team

Cal Poly, Team 8-8, Regan Spring 2014 Lid van Cal Poly, Team 8-8, Regan Spring 2014

CPSU-REGAN-S14S8G8

4 Leden

7 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 9

Afgelopen 30 Dagen: 35

Altijd: 3,703