Ga door naar hoofdinhoud

Inleiding

If you have battery problems or need to remove your battery before replacing other parts of the laptop, use this guide to remove and replace your battery.

  1. Turn off the laptop and disconnect all device cords.
    • Turn off the laptop and disconnect all device cords.

  2. Flip the laptop over so the bottom is facing you.
    • Flip the laptop over so the bottom is facing you.

  3. Use your finger or a spuger to pull the battery release switch. Use your finger or a spuger to pull the battery release switch. Use your finger or a spuger to pull the battery release switch.
    • Use your finger or a spuger to pull the battery release switch.

  4. Remove the battery from the laptop. Remove the battery from the laptop. Remove the battery from the laptop.
    • Remove the battery from the laptop.

Conclusie

To reassemble your device, follow these instructions in reverse order.

For optimal performance, after completing this guide, calibrate your newly installed battery.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

2 andere personen hebben deze handleiding voltooid.

Faith Lobaton

Lid sinds: 22-10-18

449 Reputatie

3 handleidingen geschreven

Team

UC Davis, Team S4-G5, Lore Fall 2018 Lid van UC Davis, Team S4-G5, Lore Fall 2018

UCD-LORE-F18S4G5

3 Leden

5 handleidingen geschreven

0 Opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 9

Afgelopen 7 dagen: 46

Afgelopen 30 dagen: 176

Altijd: 6,815