Repareer je spullen Gemeenschap Winkel

Acer Aspire E1-470P-6659 LCD Panel & Faceplate Replacement

Geschreven door: Joel Humes (en 2 andere bijdragers)
  • Reacties: 0
  • Favorieten: 0

Moeilijkheid

Gemiddeld

Stappen

9

Tijd vereist

10 - 20 minuten

Secties

2

Markeringen

0

Inleiding

Use this guide to replace the LCD and faceplate of your Acer Aspire E1-470P-6659.

  1. Turn off the laptop and disconnect all device cords.

    • Turn off the laptop and disconnect all device cords.

    Bewerken

  2. Flip the laptop over so the bottom is facing you.

    • Flip the laptop over so the bottom is facing you.

    Bewerken

  3. Use your finger or a spuger to pull the battery release switch. Use your finger or a spuger to pull the battery release switch. Use your finger or a spuger to pull the battery release switch.

    • Use your finger or a spuger to pull the battery release switch.

    Bewerken

  5. Remove the battery from the laptop. Remove the battery from the laptop. Remove the battery from the laptop.

    • Remove the battery from the laptop.

    Bewerken

  6. Locate the screws connected to the hinge of the laptop. Small, black stickers hide them from immediate view.

    • Locate the screws connected to the hinge of the laptop. Small, black stickers hide them from immediate view.

    Bewerken

  7. On both corners, use tweezers to remove small plastic sticker hiding the screws. Remove screws using Phillips #0 screwdriver. Remove screws using Phillips #0 screwdriver.

    • On both corners, use tweezers to remove small plastic sticker hiding the screws.

    • Remove screws using Phillips #0 screwdriver.

    Bewerken

  8. Turn the laptop over and open it up. Using a prying tool, run along all edges of the display to pry the front face plate from the cover. Use your fingers to pull the LCD panel and faceplate from the backing.

    • Turn the laptop over and open it up.

    • Using a prying tool, run along all edges of the display to pry the front face plate from the cover.

    • Use your fingers to pull the LCD panel and faceplate from the backing.

    Bewerken

  9. LCD with faceplate should separate, be careful not to pull completely away because there is a cable still attached to the display. Carefully peel tape away from cable lead and separate cable from LCD panel. Carefully peel tape away from cable lead and separate cable from LCD panel.

    • LCD with faceplate should separate, be careful not to pull completely away because there is a cable still attached to the display.

    • Carefully peel tape away from cable lead and separate cable from LCD panel.

    Bewerken

  10. Remove the LCD Panel and faceplate from the device.

    • Remove the LCD Panel and faceplate from the device.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 2 andere bijdragers

Joel Humes

Lid sinds: 22-10-18

145 Reputatie

1 Handleiding geschreven

Badges: 5

+2 andere badges

Team

UC Davis, Team S4-G5, Lore Fall 2018 Lid van UC Davis, Team S4-G5, Lore Fall 2018

UCD-LORE-F18S4G5

3 Leden

5 handleidingen geschreven

0 Opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 7

Altijd: 330