Remove the 4 rubber supports from the screen. Then remove the screws underneath.
  • Remove the 4 rubber supports from the screen. Then remove the screws underneath.

Voeg opmerking toe

With a spudger, release the clips that hold the plastic frame to the back cover. Be careful while handling the bottom part, specially with the hinges, as there are cables inside.
  • With a spudger, release the clips that hold the plastic frame to the back cover.

  • Be careful while handling the bottom part, specially with the hinges, as there are cables inside.

Voeg opmerking toe

When all the clips are out, the entire plastic frame should come out easily.
  • When all the clips are out, the entire plastic frame should come out easily.

Voeg opmerking toe

Carefully disconnect the camera cable. Carefully disconnect the camera cable.
  • Carefully disconnect the camera cable.

Voeg opmerking toe

Remove the 4 screws located in the sides of the LCD screen. Remove the 4 screws located in the sides of the LCD screen.
  • Remove the 4 screws located in the sides of the LCD screen.

Voeg opmerking toe

Remove the other 4 screws that secure the metal LCD frame to the hinges.
  • Remove the other 4 screws that secure the metal LCD frame to the hinges.

Voeg opmerking toe

Take the LCD screen out of the metal frame and flip it towards the keyboard. Take the LCD screen out of the metal frame and flip it towards the keyboard. Take the LCD screen out of the metal frame and flip it towards the keyboard.
  • Take the LCD screen out of the metal frame and flip it towards the keyboard.

Voeg opmerking toe

Remove the tape that holds the display cable. Be careful not to take the entire tape away, as this may cause severe damage to the cable.
  • Remove the tape that holds the display cable.

  • Be careful not to take the entire tape away, as this may cause severe damage to the cable.

Voeg opmerking toe

Carefully disconnect the cable with a spuger. Carefully disconnect the cable with a spuger.
  • Carefully disconnect the cable with a spuger.

Voeg opmerking toe

Unstick the cables from the back of the LCD screen. The LCD should be completely free, so just take it out and install a new one.
  • Unstick the cables from the back of the LCD screen.

  • The LCD should be completely free, so just take it out and install a new one.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

8 andere personen hebben deze handleiding voltooid.

TechStem

Lid sinds: 30-03-10

440 Reputatie

1 Handleiding geschreven

Hi there.. I just bought a display for my aspire 5536 and it seems it has a different fitting for the cable.. in fact I bought an LED display and the original one was an LCD (there is an inverter fitted in the lid under the screen) ok.. my question.. Is that possible under any circumstances to fit this new LED screen in my laptop by changing the video cable with a proper one for this new screen??

Law199 - Antwoord

Hi, thanks for the info. Can you tell me the part number of the LCD screen? thanks.

pandearroz - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 6

Afgelopen 30 Dagen: 16

Altijd: 6,216