Turn the monitor facedown.
  • Turn the monitor facedown.

  • Unscrew the 5 screws holding the back cover on.

  • (This may require flipping the monitor and shaking the screws loose once they're already unscrewed)

Voeg opmerking toe

Take the edge tool or a metal ruler and insert it into the bezel.
  • Take the edge tool or a metal ruler and insert it into the bezel.

  • Apply pressure and push down.

  • Do the same to the right side.

  • Once side of bezel facing you is decoupled, take the back cover and pry it loose.

Voeg opmerking toe

  • Remove the Power Button Circuit board Flat Flex Cable from the Power Supply board under the metal cage.

  • Pull the cord back and out of the way.

  • (It may be stuck down with adhesive)

Voeg opmerking toe

  • Remove the Flat Flex Cables from the Power Button Circuit Board.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Christopher Kelly

Lid sinds: 25-09-14

586 Reputatie

4 handleidingen geschreven

Team

USF Tampa, Team 1-3, Brown Fall 2014 Lid van USF Tampa, Team 1-3, Brown Fall 2014

USFT-BROWN-F14S1G3

3 Leden

5 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 19

Altijd: 458