Ga door naar hoofdinhoud

Access to the components 1

Gearchiveerde handleiding
Deze handleiding wordt enkel nog bijgehouden voor historische doeleinden. Gebruik de laatste versie van deze gids om uw reparatie uit te voeren.

Wat je nodig hebt

  1. Access to the components 1, Battery: stap 1, afbeelding 1 van 3 Access to the components 1, Battery: stap 1, afbeelding 2 van 3 Access to the components 1, Battery: stap 1, afbeelding 3 van 3
    • Open the latch on the right side that secures the battery in place.

    • Open the latch on the left side that secures the battery in place.

    • Now remove the battery.

  2. Access to the components 1, Access to the components 1: stap 2, afbeelding 1 van 3 Access to the components 1, Access to the components 1: stap 2, afbeelding 2 van 3 Access to the components 1, Access to the components 1: stap 2, afbeelding 3 van 3
    • Use the Philips screwdriver to remove the two screws on the bottom cover.

    • Check the markers to determine how to remove the cover.

    • Now remove the cover as prescribed by the markers.

  3. Access to the components 1: stap 3, afbeelding 1 van 1
    • The components HDD hard disk and BIOS battery are now visible.

Conclusie

To assemble the device, proceed in reverse order

Met dank aan deze vertalers:

de en

100%

irlanda helpt ons de wereld te herstellen! Wil je bijdragen?
Begin met vertalen ›

Felice Suglia

Lid sinds: 06/15/13

30.908 Reputatie

264 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 1

Altijd: 50