Ga door naar hoofdinhoud

Inleiding

This guide will show how to replace the speaker woofers on the AYL SoundFit. There is one on each side of the device. With just a screwdriver, the speaker woofers can be removed and replaced in a few simple steps.

Onderdelen

Geen onderdelen opgegeven.

  1. AYL SoundFit Speaker Woofer Replacement, Speaker Woofer: stap 1, afbeelding 1 van 1
    • Remove each of the 4 screws on the front cover using the 2.5mm Hex Bit in the screwdriver.

  2. AYL SoundFit Speaker Woofer Replacement: stap 2, afbeelding 1 van 1
    • Remove the cover with a spudger.

  3. AYL SoundFit Speaker Woofer Replacement: stap 3, afbeelding 1 van 1
    • Remove the inner panel using a spudger.

    • During reassembly, place the new inner panel in the same position as the original panel.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Taylor Shuler

Lid sinds: 16-02-16

245 Reputatie

2 handleidingen geschreven

Team

IUPUI, Team 3-3, Harley Spring 2016 Lid van IUPUI, Team 3-3, Harley Spring 2016

IUPUI-HARLEY-S16S3G3

4 Leden

5 handleidingen geschreven

0 Opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 2

Altijd: 298