Repareer je spullen Gemeenschap Winkel

AYL SoundFit Speaker Replacement

Inleiding

Use this guide to replace the speaker of the AYL SoundFit.

Wat je nodig hebt

  1. AYL SoundFit Speaker Replacement, Motherboard: stap 1, afbeelding 1 van 1

    • Unscrew the four hex screws on the top of the device using a 2.5mm hex screwdriver.

    Vertaal

  2. AYL SoundFit Speaker Replacement: stap 2, afbeelding 1 van 1

    • Place a spudger between the black plastic cover and the green case.

    • Remove the black cover away from the main casing and remove the cover.

    Vertaal

  3. AYL SoundFit Speaker Replacement: stap 3, afbeelding 1 van 1

    • Place the spudger tool between the black housing, which contains the woofer, and the outer rubber casing.

    • Remove the housing away from the body to reveal the motherboard, speaker, and battery.

    Vertaal

  5. AYL SoundFit Speaker Replacement: stap 4, afbeelding 1 van 2 AYL SoundFit Speaker Replacement: stap 4, afbeelding 2 van 2

    • Remove the two Phillips screws which hold its battery casing on the housing using a PH00 Phillips screwdriver.

    • Remove the battery case to reveal the battery.

    Vertaal

  6. AYL SoundFit Speaker Replacement: stap 5, afbeelding 1 van 1

    • Using a soldering iron, heat up and remove both the positive and negative battery contacts from the motherboard.

    Vertaal

  7. AYL SoundFit Speaker Replacement: stap 6, afbeelding 1 van 3 AYL SoundFit Speaker Replacement: stap 6, afbeelding 2 van 3 AYL SoundFit Speaker Replacement: stap 6, afbeelding 3 van 3

    • Remove all three Phillips screws which holds the motherboard to the base using a PH00 Phillips screwdriver.

    • The motherboard can now be wiggled free from the base.

    Vertaal

  8. AYL SoundFit Speaker Replacement, Speaker: stap 7, afbeelding 1 van 1

    • Using a soldering iron, heat up and remove the positive and negative wire contacts from the motherboard.

    Vertaal

  9. AYL SoundFit Speaker Replacement: stap 8, afbeelding 1 van 1

    • Remove four Phillips #1 screws to detach the speaker form the module.

    • Extract the speaker from the body of the AYL SoundFit.

    Vertaal
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 3 andere bijdragers

Sajal Kherde

Lid sinds: 02/16/16

107 Reputatie

1 Handleiding geschreven

Medailles: 4

+1 extra badge

Team

IUPUI, Team 3-3, Harley Spring 2016 Lid van IUPUI, Team 3-3, Harley Spring 2016

IUPUI-HARLEY-S16S3G3

4 Leden

5 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 628