Repareer je spullen Gemeenschap Winkel

ASUS ZenWatch Charging Cradle Circuit board Replacement

Inleiding

Replacing the circuit in the charging cradle

Wat je nodig hebt

  1. ASUS ZenWatch Charging Cradle Circuit board Replacement, Charging Cradle Circuit board: stap 1, afbeelding 1 van 3 ASUS ZenWatch Charging Cradle Circuit board Replacement, Charging Cradle Circuit board: stap 1, afbeelding 2 van 3 ASUS ZenWatch Charging Cradle Circuit board Replacement, Charging Cradle Circuit board: stap 1, afbeelding 3 van 3

    • Using a metal spudger gently pry the plastic outer case apart

    • Pry open a little bit on each side before trying to open fully

    Bewerken

  3. ASUS ZenWatch Charging Cradle Circuit board Replacement: stap 2, afbeelding 1 van 3 ASUS ZenWatch Charging Cradle Circuit board Replacement: stap 2, afbeelding 2 van 3 ASUS ZenWatch Charging Cradle Circuit board Replacement: stap 2, afbeelding 3 van 3

    • Use the PH0 sized Phillips screwdriver to remove the three screws (2mm) holding the board to the cradle.

    • Gently pry up with your hands to pull the board off.

    • Don't grab directly on the USB port as you may loosen or bust the connections.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 2 andere bijdragers

Wayne McClure

Lid sinds: 02/10/16

961 Reputatie

5 handleidingen geschreven

Medailles: 14

+11 andere badges

Team

USF Tampa, Team 1-3, Sullivan Spring 2016 Lid van USF Tampa, Team 1-3, Sullivan Spring 2016

USFT-SULLIVAN-S16S1G3

4 Leden

7 handleidingen geschreven

Één opmerking

If you had listed what components were on the board or at least taken a picture of the other side of the board, I might have given you some points.

Nate Fansler - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 4

Afgelopen 30 dagen: 7

Altijd: 2,838