ASUS Q536F Fan Replacement

Inleiding

Laptops may need a fan replacement to address overheating, noise, reduced performance, frequent shutdowns, error messages, physical damage. It's essential to use compatible replacement fans and follow proper installation procedures for optimal functionality.

Wat je nodig hebt

Stap 1 Back Panel

ASUS Q536F Fan Replacement, Back Panel: stap 1, afbeelding 1 van 2

ASUS Q536F Fan Replacement, Back Panel: stap 1, afbeelding 2 van 2

Remove ten 2 mm screws using a Phillips #0 screwdriver.
Remove the screw in the center using a T4 Torx screwdriver.
Use an iFixit opening tool to pry open the back panel.
It's normal to hear some cracking, but proceed with caution.

Bewerken

Stap 2 Fan

ASUS Q536F Fan Replacement, Fan: stap 2, afbeelding 1 van 2

ASUS Q536F Fan Replacement, Fan: stap 2, afbeelding 2 van 2

Use a Phillips #0 screwdriver to remove the six 2 mm fan screws.
Use a Phillips #0 screwdriver to remove the five 2 mm heatsink screws.
Warped Screw
Heatsink shown has warped screw, so unable to remove

Bewerken

Stap 3

Gereedschap gebruikt in deze stap:

Tweezers

$4.99

Koop

Disconnect white and black antennae cables.
Using tweezers for this would be helpful.

Bewerken

Stap 4

Disconnect fan cables pulling outwards as shown.

Bewerken

Stap 5

ASUS Q536F Fan Replacement: stap 5, afbeelding 3 van 3

Carefully lift heatsink upward using a Ifixit opening tool or Fingers pull fan out from under the heat sink.
The fan can be removed without removing the heatsink, although it may be easier to remove.