Ga door naar hoofdinhoud

2013 Subaru Impreza WRX Mud Flaps Replacement

Wat je nodig hebt

  1. 2013 Subaru Impreza WRX Mud Flaps Replacement, Mud Flaps: stap 1, afbeelding 1 van 1
    • Always make sure your car is off, the parking break is applied, and you are in a safe area free from other passing cars.

  2. 2013 Subaru Impreza WRX Mud Flaps Replacement: stap 2, afbeelding 1 van 1
    • Turn the wheels all the way towards the side you will be working on.

    • This will create easier access to the inside of the wheel well when you are replacing the mud flap.

  3. 2013 Subaru Impreza WRX Mud Flaps Replacement: stap 3, afbeelding 1 van 3 2013 Subaru Impreza WRX Mud Flaps Replacement: stap 3, afbeelding 2 van 3 2013 Subaru Impreza WRX Mud Flaps Replacement: stap 3, afbeelding 3 van 3
    • Start with the front mud flaps.

    • Attach the 7/16th size socket piece to the wrench and begin removing the 7/16th diameter nuts.

  4. 2013 Subaru Impreza WRX Mud Flaps Replacement: stap 4, afbeelding 1 van 3 2013 Subaru Impreza WRX Mud Flaps Replacement: stap 4, afbeelding 2 van 3 2013 Subaru Impreza WRX Mud Flaps Replacement: stap 4, afbeelding 3 van 3
    • Use your Philips Head screwdriver to unscrew the farthest #6 3/4" Stainless Philips Screw.

    • Be careful not to loose the rubber gasket attached to the screw.

  5. 2013 Subaru Impreza WRX Mud Flaps Replacement: stap 5, afbeelding 1 van 3 2013 Subaru Impreza WRX Mud Flaps Replacement: stap 5, afbeelding 2 van 3 2013 Subaru Impreza WRX Mud Flaps Replacement: stap 5, afbeelding 3 van 3
    • Once the old mud flap is removed, grab your new mud flap and reattach it in the same manner as how you removed the old or broken one.

    • Repeat for opposite front mud flap.

  6. 2013 Subaru Impreza WRX Mud Flaps Replacement: stap 6, afbeelding 1 van 3 2013 Subaru Impreza WRX Mud Flaps Replacement: stap 6, afbeelding 2 van 3 2013 Subaru Impreza WRX Mud Flaps Replacement: stap 6, afbeelding 3 van 3
    • For the back two mud flaps you will need to use a slightly different technique due to the limited space you will be working in.

    • Use your hands and the 10mm wrench piece to unbolt the mud flap.

    • Once you have removed the nuts, you can move on to the #6 3/4" Philips Head Screw.

    • This step will be aided by the use of an extra small Philips screwdriver.

  7. 2013 Subaru Impreza WRX Mud Flaps Replacement: stap 7, afbeelding 1 van 2 2013 Subaru Impreza WRX Mud Flaps Replacement: stap 7, afbeelding 2 van 2
    • Replace both back mud flaps and fasten all pieces back in place.

  8. 2013 Subaru Impreza WRX Mud Flaps Replacement: stap 8, afbeelding 1 van 2 2013 Subaru Impreza WRX Mud Flaps Replacement: stap 8, afbeelding 2 van 2
    • Make sure the mud flaps are all properly tightened and positioned before driving your car again.

    • Enjoy your brand new mud flaps.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Alex Davis

Lid sinds: 09/29/15

101 Reputatie

1 Handleiding geschreven

Team

Cal Poly, Team 14-3, Green Fall 2015 Lid van Cal Poly, Team 14-3, Green Fall 2015

CPSU-GREEN-F15S14G3

4 Leden

5 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 10

Altijd: 918