Repareer je spullen Gemeenschap Winkel

2006 Chrysler 300 Sun Visor Replacement

Inleiding

A loose or hanging sun visor is a driving hazard to the driver, other people in the car, and other motorists. The visor can drop suddenly causing you to wreck your car. Fortunately, there are plenty of new and used sun visors to choose from. Just google your car’s make and model and start shopping.

This guide has easy step-by-step instructions to replace that visor and make your car safe to drive. You will need a T15 Torx screwdriver.

Wat je nodig hebt

  1. 2006 Chrysler 300 Sun Visor Replacement, Sun Visor: stap 1, afbeelding 1 van 1

    • Unscrew the 2 screws from the left side of the bracket.

    Bewerken

  2. 2006 Chrysler 300 Sun Visor Replacement: stap 2, afbeelding 1 van 1

    • Unhook and move the visor for access to the 3rd screw.

    • Hold the visor. Do not let go of the visor. If you do, the weight of the visor might damage the attached wires.

    • Unscrew the 3rd Screw.

    Bewerken

  3. 2006 Chrysler 300 Sun Visor Replacement: stap 3, afbeelding 1 van 2 2006 Chrysler 300 Sun Visor Replacement: stap 3, afbeelding 2 van 2

    • Lightly pull the wire so the connector is outside of the headliner.

    Bewerken

  5. 2006 Chrysler 300 Sun Visor Replacement: stap 4, afbeelding 1 van 2 2006 Chrysler 300 Sun Visor Replacement: stap 4, afbeelding 2 van 2

    • Press and lightly pull the small tab to release the connecting wires.

    Bewerken

  6. 2006 Chrysler 300 Sun Visor Replacement: stap 5, afbeelding 1 van 2 2006 Chrysler 300 Sun Visor Replacement: stap 5, afbeelding 2 van 2

    • Reconnect the new sun visor wire.

    • Pull down slightly on the headliner and tuck the wire back inside.

    Bewerken

  7. 2006 Chrysler 300 Sun Visor Replacement: stap 6, afbeelding 1 van 1

    • Hold the visor. Do not let go of the visor. If you do, the weight of the visor might damage the attached wires.

    • Align the bracket holes and screw in the right side screw.

    Bewerken

  8. 2006 Chrysler 300 Sun Visor Replacement: stap 7, afbeelding 1 van 1

    • Hang the visor on the hook for support.

    • Screw in the other 2 screws.

    Bewerken
Conclusie

The same steps apply to replace the passenger side sun visor.

Auteur

met 2 andere bijdragers

Bonnie

Lid sinds: 10/06/22

145 Reputatie

1 Handleiding geschreven

Medailles: 2

Team

University of North Texas, Team 2-6, Raign Fall 2022 Lid van University of North Texas, Team 2-6, Raign Fall 2022

UNT-RAIGN-F22S2G6

2 Leden

2 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 7

Afgelopen 30 dagen: 23

Altijd: 514