Repareer je spullen Gemeenschap Winkel

2004 Mazda 3 Stereo-CD Player (BN85-66-9RXA) Disassembly

Inleiding

This guide will show you how to remove the front panel and the metal casing of this 2004 Mazda 3 stereo unit in order to expose the 5-disc CD drive.

Wat je nodig hebt

  1. 2004 Mazda 3 Stereo-CD Player (BN85-66-9RXA) Disassembly, Stereo Unit: stap 1, afbeelding 1 van 1

    • This is the front panel of the 2004 Mazda 3 Stereo-CD Player. It's listed under the model number: BN85-66-9RXA.

    Bewerken

  2. 2004 Mazda 3 Stereo-CD Player (BN85-66-9RXA) Disassembly: stap 2, afbeelding 1 van 1

    • On the right side of the unit, designated by the letter R, remove 6 screws using a Phillips #2 screwdriver.

    Bewerken

  3. 2004 Mazda 3 Stereo-CD Player (BN85-66-9RXA) Disassembly: stap 3, afbeelding 1 van 1

    • On the left side of unit, designated by the letter L, remove 6 screws using a Phillips #2 screwdriver.

    • Gently pull on the cable to disconnect it from the front panel.

    • Now you can fully detach the front panel as well as the LCD display from the unit.

    Bewerken

  4. 2004 Mazda 3 Stereo-CD Player (BN85-66-9RXA) Disassembly: stap 4, afbeelding 1 van 1

    • On the top of the unit, remove 2 screws with a Phillips #2 screwdriver.

    • Lift and remove the top case from the unit.

    Bewerken

  6. 2004 Mazda 3 Stereo-CD Player (BN85-66-9RXA) Disassembly: stap 5, afbeelding 1 van 1

    • On the bottom of the unit, remove 2 screws with the Phillips #2 screwdriver.

    Bewerken

  7. 2004 Mazda 3 Stereo-CD Player (BN85-66-9RXA) Disassembly: stap 6, afbeelding 1 van 1

    • On the back of the unit, remove 8 screws with a Phillips #2 screwdriver.

    • Remove 1 screw with a Phillips #1 screwdriver.

    • Pull off both the bottom and top metal plates.

    Bewerken

  8. 2004 Mazda 3 Stereo-CD Player (BN85-66-9RXA) Disassembly: stap 7, afbeelding 1 van 1

    • On the front of the unit, remove 4 screws with a Phillips #2 screwdriver.

    Bewerken

  9. 2004 Mazda 3 Stereo-CD Player (BN85-66-9RXA) Disassembly: stap 8, afbeelding 1 van 1

    • On the left side of the unit, designated by the letter L, remove 2 screws with a Phillips #2 screwdriver.

    • Remove 1 screw with a Phillips #1 screwdriver.

    Bewerken

  10. 2004 Mazda 3 Stereo-CD Player (BN85-66-9RXA) Disassembly: stap 9, afbeelding 1 van 1

    • On the right side of the unit, designated by the letter R, remove 2 screws with a Phillips #2 screwdriver.

    • Pull the front metal plate off the unit. Then lift the CD drive from the lower metal case.

    Bewerken

  11. 2004 Mazda 3 Stereo-CD Player (BN85-66-9RXA) Disassembly, CD Drive: stap 10, afbeelding 1 van 1

    • Remove 2 screws with a Phillips #1 screwdriver from the front of the CD drive.

    • Very gently pull apart the top metal case from the CD drive without damaging the ribbon cable.

    Bewerken

  12. 2004 Mazda 3 Stereo-CD Player (BN85-66-9RXA) Disassembly: stap 11, afbeelding 1 van 1

    • Gently pull the ribbon cable from the connector on the CD drive logic board.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Auteur

met 2 andere bijdragers

Robin Nystrom

Lid sinds: 06/13/16

182 Reputatie

1 Handleiding geschreven

Medailles: 4

+1 extra badge

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 14

Afgelopen 30 dagen: 50

Altijd: 5,018