Ga door naar hoofdinhoud

1999 - 2003 Acura TL Ignition Coil Replacement

Wat je nodig hebt

  1. 1999 - 2003 Acura TL Ignition Coil Replacement, Ignition Coil: stap 1, afbeelding 1 van 2 1999 - 2003 Acura TL Ignition Coil Replacement, Ignition Coil: stap 1, afbeelding 2 van 2
    • Open the driver side door of car.

  2. 1999 - 2003 Acura TL Ignition Coil Replacement: stap 2, afbeelding 1 van 2 1999 - 2003 Acura TL Ignition Coil Replacement: stap 2, afbeelding 2 van 2
    • Pull the hood latch below the steering wheel and near the door frame towards you to pop open the hood.

  3. 1999 - 2003 Acura TL Ignition Coil Replacement: stap 3, afbeelding 1 van 2 1999 - 2003 Acura TL Ignition Coil Replacement: stap 3, afbeelding 2 van 2
    • Lift the hood slightly to where your fingers can fit under the hood.

    • Reach your fingers under the hood to find the latch that is slightly right off the center.

    • Pull and hold the latch up while simultaneously lifting the hood all the way up until it stays stationary.

    • Be careful that the hood is lifted properly to avoid an accident.

  4. 1999 - 2003 Acura TL Ignition Coil Replacement: stap 4, afbeelding 1 van 3 1999 - 2003 Acura TL Ignition Coil Replacement: stap 4, afbeelding 2 van 3 1999 - 2003 Acura TL Ignition Coil Replacement: stap 4, afbeelding 3 van 3
    • Use a flathead screwdriver to remove one screw from each corner of the cover.

  5. 1999 - 2003 Acura TL Ignition Coil Replacement: stap 5, afbeelding 1 van 1
    • Pull the engine cover towards you to remove it.

  6. 1999 - 2003 Acura TL Ignition Coil Replacement: stap 6, afbeelding 1 van 3 1999 - 2003 Acura TL Ignition Coil Replacement: stap 6, afbeelding 2 van 3 1999 - 2003 Acura TL Ignition Coil Replacement: stap 6, afbeelding 3 van 3
    • Pinch the socket, attached to engine coil, and pull up to release.

    • With an Allen key, loosen the screw holding the coil by turning counterclockwise.

    • Make sure to avoid exposed wires.

  7. 1999 - 2003 Acura TL Ignition Coil Replacement: stap 7, afbeelding 1 van 3 1999 - 2003 Acura TL Ignition Coil Replacement: stap 7, afbeelding 2 van 3 1999 - 2003 Acura TL Ignition Coil Replacement: stap 7, afbeelding 3 van 3
    • Pull out the old coil.

    • Avoid exposed wires.

  8. 1999 - 2003 Acura TL Ignition Coil Replacement: stap 8, afbeelding 1 van 3 1999 - 2003 Acura TL Ignition Coil Replacement: stap 8, afbeelding 2 van 3 1999 - 2003 Acura TL Ignition Coil Replacement: stap 8, afbeelding 3 van 3
    • Insert the new coil.

  9. 1999 - 2003 Acura TL Ignition Coil Replacement: stap 9, afbeelding 1 van 2 1999 - 2003 Acura TL Ignition Coil Replacement: stap 9, afbeelding 2 van 2
    • Attach the wire socket to the new coil until you hear a "click," indicating that it is properly inserted.

  10. 1999 - 2003 Acura TL Ignition Coil Replacement: stap 10, afbeelding 1 van 1
    • With an Allen key, tighten the screw into the new coil turning clockwise to secure into place.

  11. 1999 - 2003 Acura TL Ignition Coil Replacement: stap 11, afbeelding 1 van 3 1999 - 2003 Acura TL Ignition Coil Replacement: stap 11, afbeelding 2 van 3 1999 - 2003 Acura TL Ignition Coil Replacement: stap 11, afbeelding 3 van 3
    • Reattach the engine cover and secure the screws with the flathead screwdriver.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 15

Altijd: 136