Use a #2 Phillips screwdriver to remove the four screws.
  • Use a #2 Phillips screwdriver to remove the four screws.

Voeg opmerking toe

Remove the rubber gasket from the rain tray.
  • Remove the rubber gasket from the rain tray.

Voeg opmerking toe

Lift the tray upwards and away from the vehicle.
  • Lift the tray upwards and away from the vehicle.

Voeg opmerking toe

Use a flathead screwdriver to remove the cap from the windshield wiper.
  • Use a flathead screwdriver to remove the cap from the windshield wiper.

Voeg opmerking toe

Use a socket wrench to release the passenger-side windshield wiper locking nut.
  • Use a socket wrench to release the passenger-side windshield wiper locking nut.

Voeg opmerking toe

Gently lift up the passenger-side windshield wiper. Gently lift up the passenger-side windshield wiper.
  • Gently lift up the passenger-side windshield wiper.

Voeg opmerking toe

Remove the driver-side windshield wiper in the same fashion.
  • Remove the driver-side windshield wiper in the same fashion.

Voeg opmerking toe

Lift up the plastic cover. Lift up the plastic cover.
  • Lift up the plastic cover.

Voeg opmerking toe

Use an offset Phillips screwdriver to remove a screw in the back of the automatic control unit cover. In a pinch, you can make this tool with a phillips driver bit and end wrench.
  • Use an offset Phillips screwdriver to remove a screw in the back of the automatic control unit cover.

  • In a pinch, you can make this tool with a phillips driver bit and end wrench.

Voeg opmerking toe

Use a #2 Phillips screwdriver to remove the front two screws.
  • Use a #2 Phillips screwdriver to remove the front two screws.

Voeg opmerking toe

Gently unplug and lift out the automatic transmission control unit. Gently unplug and lift out the automatic transmission control unit.
  • Gently unplug and lift out the automatic transmission control unit.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

5 andere personen hebben deze handleiding voltooid.

Matthew Newsom

Lid sinds: 05-01-10

31.471 Reputatie

93 handleidingen geschreven

Does the new TCU need to be programmed in any way?? Or is it just plug and play.

Paul Newlove - Antwoord

does it need to be programmed mine needs replacement my gears are not shifting

dean wafula - Antwoord

got a question if your display light is dim what could be the problem

dean wafula - Antwoord

Volkswagen tiguan won't start after disconnection, wat can I do to restart it

Jusu Suapay - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 16

Afgelopen 7 Dagen: 111

Afgelopen 30 Dagen: 499

Altijd: 28,992