Repareer je spullen Gemeenschap Winkel

1999-2006 BMW 3 Series Ignition Coils Replacement

Inleiding

This tutorial will focus on the replacement of the six ignition coils of the 3 Series BMW (1999-2006) due to engine misfires. Some reasons for engine misfires can include rough idling and late shifting. The BMW series 3 (1999-2006) also needs regular replacements for the car’s ignition coils. BMW recommends replacing these ignition coils every 100,000 miles for non-turbocharged vehicles and every 45,000 miles for turbo-charged vehicles. With the help of this tutorial, you will have no problem keeping your BMW 3 series running smoothly and at its optimal performance.

Wat je nodig hebt

  1. 1999-2006 BMW 3 Series Ignition Coils Replacement, Ignition Coils: stap 1, afbeelding 1 van 3 1999-2006 BMW 3 Series Ignition Coils Replacement, Ignition Coils: stap 1, afbeelding 2 van 3 1999-2006 BMW 3 Series Ignition Coils Replacement, Ignition Coils: stap 1, afbeelding 3 van 3

    • Release the hood latch by pulling the lever found in the driver foot well.

    • Open the hood.

    Bewerken

  2. 1999-2006 BMW 3 Series Ignition Coils Replacement: stap 2, afbeelding 1 van 3 1999-2006 BMW 3 Series Ignition Coils Replacement: stap 2, afbeelding 2 van 3 1999-2006 BMW 3 Series Ignition Coils Replacement: stap 2, afbeelding 3 van 3

    • Remove the oil cap and note the four bolt placements.

    Bewerken

  4. 1999-2006 BMW 3 Series Ignition Coils Replacement: stap 3, afbeelding 1 van 3 1999-2006 BMW 3 Series Ignition Coils Replacement: stap 3, afbeelding 2 van 3 1999-2006 BMW 3 Series Ignition Coils Replacement: stap 3, afbeelding 3 van 3

    • Using a 10 mm socket wrench, remove the four bolts holding down the engine covers.

    Bewerken

  5. 1999-2006 BMW 3 Series Ignition Coils Replacement: stap 4, afbeelding 1 van 3 1999-2006 BMW 3 Series Ignition Coils Replacement: stap 4, afbeelding 2 van 3 1999-2006 BMW 3 Series Ignition Coils Replacement: stap 4, afbeelding 3 van 3

    • Note the placement of each ignition coil then remove the plastic latch and disconnect each cable.

    Bewerken

  6. 1999-2006 BMW 3 Series Ignition Coils Replacement: stap 5, afbeelding 1 van 1

    • With a firm grip, remove each ignition coil and replace with the new coils respectively.

    • Repeat steps 4 to 1 for reassembly.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

4 andere personen hebben deze handleiding voltooid.

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 3

Afgelopen 7 dagen: 16

Afgelopen 30 dagen: 107

Altijd: 2,420