Gereedschap

Geen gereedschap nodig.

Onderdelen

Prop up your hood.
  • Prop up your hood.

  • Make sure you prop your hood up with your hood prop rod.

Voeg opmerking toe

Locate the back of the headlight you plan to replace the bulb in.
  • Locate the back of the headlight you plan to replace the bulb in.

    • This will be directly behind the headlight assembly.

  • If you are replacing your left headlight, you may need to remove the battery to have enough room to do this replacement.

Voeg opmerking toe

  • Disconnect the headlight.

Voeg opmerking toe

  • Remove the rubber cover by pulling on the tab marked "Pull Top" away from you.

Voeg opmerking toe

  • Release the bulb by pushing the metal fastener inward and then moving it upwards.

Voeg opmerking toe

  • Remove the bulb.

Voeg opmerking toe

  • Insert the new bulb. Make sure the metal tabs fit correctly.

  • I've read that touching the glass on the bulb can shorten the life of the bulb, so try not to do that.

Voeg opmerking toe

Conclusie

To finish your headlight bulb replacement, follow these instructions in reverse order.

12 andere personen hebben deze handleiding voltooid.

Chris Opperwall

Lid sinds: 04-04-13

1.062 Reputatie

1 Handleiding geschreven

Één commentaar

The 2000 and 2001 Camry models take 9006 (HB4) bulbs for the low beams and 9005 (HB3) bulbs for the high beams, rather than the 9003 (HB2) linked here -- at least for the North American models I've looked up.

If you have the original owner's manual that came with the car, there's a table of all the bulb types you'll need for different lights in the "Do-It-Yourself Maintenance" section. It doesn't hurt to double check.

rakslice - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 16

Afgelopen 7 Dagen: 107

Afgelopen 30 Dagen: 468

Altijd: 30,084