OPGELOST: Broken Pins on logic board - iPod Classic

Broken Pins on logic board

What does the cable shown in the image here do?

http://guide-images.ifixit.net/igi/kMEET...

The pins that it connects to have broken off from the logic board so wondering if a skilled solderer would be able to fix it or if i would need to order a new logic board?

Thanks.

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee

Score -1

Gepost: 31 jul. 2012

Opties

Paul Bruckshaw, that is your battery connector. The connector is soldered onto the logic board and not really easy to replace. Unless of course you do know how to solder SMD onto the logic board. Somebody that is used to soldering small SMD components could easily fix it up for you. You might want to try a local TV-Electronic repair shop. Here is a decent video showing you the repair. The part is available at places like this. Hope this helps, good luck.

Was dit antwoord nuttig?

Ja Nee

Score 1

2 opmerkingen:

Thank you for confirming this, i found out after i tried charging it that it was doing nothing. I will be giving this job to a decent solderer as I am terrible at it.

1 aug. 2012 door Paul Bruckshaw

Than you for accepting my answer. Best of luck with the repair.

1 aug. 2012 door oldturkey03

Voeg een opmerking toe

iPod 6th Generation

Broken Pins on logic board

1 Antwoord

Voeg je antwoord toe