Rep: 1
2
I tried to connect my macbook pro 13 to a projector and i get only vertical lines on the screen. I used the apple recommended Mini-display port/thunderport adapter to VGA but nothing works out. Any info is highly appreciable.
Is dit een goede vraag?
Rep: 116,3k
66
68
359
Try changing the resolution & cycle settings of your laptop. Projectors have (and you must know) resolution parameters or limits. Refresh rate Hz cycles also must match. I would imagine that if the external video is not showing up in System Preferences:Displays window you have either a resolution/cycle matching problem OR a connector/adapter problem.
There is a "detect displays" button in System Preferences to use if connecting the cables/adaptor doesn't automagically find a second display.
If this answer was helpful please remember to return an mark it Accepted.
Was dit antwoord nuttig?
Rep: 13
1
If VGA shows nothing...Plug in the VGA cable to the projector and the adapter. Then, close the Mac book while powered on, causing it to go into sleep...Plug in the adapter and open the mac book back up. It should work...thats what I have to do if I want to use VGA... My Mac book freezes when I plug in the VGA adapter with the screen open...
Was dit antwoord nuttig?
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 0
Afgelopen 30 dagen: 0
Altijd: 3,157
