Ga door naar hoofdinhoud

Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White.

3284 Vragen Bekijk alle

little ribbon guard mainboard


I just reassembled an new display on my iphone 4 and unfortunately this little black ribbon guard on the top of the mainboard broke off(or is not inserted anymore)

Note that there is a rubber guard on the edge of the logic board where the Digitizer and LCD ribbon cables bend over the logic board. Make certain it is there before replacing the logic board during reassembly.

can anybody tell me, where this piece has to be inserted??or what it is actually for??


Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

3 Antwoorden

Het nuttigste antwoord

The black rubber piece is there to make sure that the ribbon cables for the display do not get creased and instead only bend at a certain degree. There is a little black grove on the rubber piece and that grove fits with the logic board. Its not meant to stay there and can easily come off so all you have to do is slip it back on to the top of the logic board. Here is a picture of it right above where it is put on the logic board:

Block Image

Hope this Helps

Was dit antwoord nuttig?

Score 1
Voeg een opmerking toe

ohh this picture ist awesome...thank you very much

Was dit antwoord nuttig?

Score 0


If the answer is helpful you can mark it as accepted.


Voeg een opmerking toe

its not that important, i dont usually bother to put it back if it falls..

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

mirko zal eeuwig dankbaar zijn.

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 2,652