Ga door naar hoofdinhoud

Model No. A1367 / 8, 16, 32, or 64 GB capacity

913 Vragen Bekijk alle
Vraag afgerond

iPod screen not sitting well

I just replaced a screen for a friend on their iPod 4g. it is my first iPod repair. The screen does not sit properly, it pushes it self out, and I don't know what to d0. I am using the 3M 300lse glue, is that the wrong kind? Any ideas? I can get you all the details you need, but I don't know what would be useful.

Any help is much appreciated!

Sincerely,

Micah

Thanks! I'm really staring to like iFixit a lot!

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

Check your Digitizer Flex cable. Often it is bent improperly, and part of the flex comes under where the LCD Should sit, causing the screen to pop out. The flex should fold down so that it is only over the copper / silver cover.

Best of Luck,

Was dit antwoord nuttig?

Score 2
Voeg een opmerking toe
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 555