Ga door naar hoofdinhoud

Mid 2010 Model A1278 / 2.4 or 2.66 GHz Core 2 Duo processor

841 Vragen Bekijk alle

Can I blow a good logic board when replacing in bad MBP?

Can I blow a good replacement logic board by installing it in a MBP with a bad DC In Board or other assembly? I'm trying to test the DC In Board which is probably bad. Is there a better way to test it? Are there other assemblies that if defective, can damage the logic board?

Beantwoord! View the answer Dit probleem heb ik ook

Is dit een goede vraag?

Score 1
Een opmerking toevoegen

2 Antwoorden

Gekozen oplossing

Changing parts around is always a risk. Observe good ESD procedures: How do I ground my ESD mat to avoid shocking computers?

Was dit antwoord nuttig?

Score 3
Een opmerking toevoegen

Bad DC in won't cause any problem, it is just a gate sending power to the board.

Bad LCD cable will short backlight or PP3V3_S0 to ground.

Bad wifi cable or bad hard drive will blow inductors on the board.

Bad battery might blow up current sensing circuitry or cause SMC issues.

Bad webcam or trackpad may pull sensor lines down.

The dc in board is never bad unless it is covered in green corroding junk; it's just wishful thinking because dc in board is $5. :(

Was dit antwoord nuttig?

Score 2
Een opmerking toevoegen

Voeg je antwoord toe

bodkincreative zal eeuwig dankbaar zijn.

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 464