Ga door naar hoofdinhoud

Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White. This page aims to help users troubleshoot, fix, and seek help for the iPhone 4.

2375 Vragen Bekijk alle
Vraag afgerond

unknown part from iPhone 4 lcd glass replacement

I was taking the screen off my iphone 4, then a part falls out and I couldn't figure out where it goes.

Please view the picture I link below.

The part on the left I'm more concern with.

The part on the right is a rubber tube, and I don't know where it comes from neither.

Please help. Thanks

iPhone 4 unknown parts

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
1 Opmerking

googled and got them figured out :D

door

Voeg een opmerking toe

2 Antwoorden

Gekozen oplossing

The metal clip goes under the battery connector exactly as shown in your top photo. The battery screw goes through the hole. Place clip, snap battery connector down onto clip, replace battery screw.

The black rubber part sits on top left of Logic Board, it is a bumper, cushion for the two front screen flex cables. Therefore it is placed directly on the top left edge of Logic Board and under the two flex cables.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

thanks I appreciate it :)

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 603