Rep: 5
2
1
I bought SSD drive "Toshiba THNS128GG4BMAA for apple macbook air Rev B&C" (Ebay)
I installed it into my MB543LL (late 2008) instead old Samsung HDD. But Apple disk utilites does not see this drive and i can not format or install OS
Is there a way to make this SSD visible by Apple disk utilite ?
Is dit een goede vraag?
Rep: 685,3k
3,4k
1,1k
2,6k
The drive is probably a 3GB and needs to be slowed down to 1.5 GB to be seen. See if the drive has jumper pins and try 1&2 or 3&4.
Was dit antwoord nuttig?
is there a jumper on this SSD ?
I don't know, look at it.
no jumpers on Toshiba THNS128GG4BMAA
Contact Toshiba to see if it can be slowed down or if it is compatable: http://www.toshiba.com/tai/support_consu...
Were you able to find a cable that will work with that drive?
Was dit antwoord nuttig?
Rep: 5
2
1
you can use the same original cable. Just flip hdd to connect (Toshiba THNS128GG4BMAA must be connected not like original hdd) - inverted
Was dit antwoord nuttig?
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 0
Afgelopen 30 dagen: 1
Altijd: 1,957
1 Opmerking
i find answer myself. This SSD must be connected by inverted hard drive cable
door Andre